Open your Control Panel. Select Hardware and Sound. Select Devices and Printers. Select Bluetooth Devices. Click Add a device. Select BOOM 2 from the list of devices, and then click next. Select Manage audio devices under Sound. Click OK. Turn Headset mode off on your smartphone to take the call directly. Adjust the call volume from either the phone or speaker. Make sure your device is paired with your speaker and Bluetooth is active. Place your Bluetooth device closer to the speaker — it might be out of range.
Move your Bluetooth device and speaker away from other wireless sources — you could be experiencing interference. It comes out of the box ready to pair. Move away from other sources of wireless signal — you could be experiencing interference. Make sure your speaker has enough battery power connect it to a power source with the supplied adapter.
Adjust the volume on both the audio source and your speaker. Restart both your speaker and the audio source. Connect a second device to your speaker the same way you did in step 1. Once you have two devices connected, you can start playing audio from one of them.
To switch and play audio from another connected device, pause the current one. Then, start playing the other. Hold down the Bluetooth button until you hear a tone. NOTE: The Bluetooth connection button will blink rapidly, indicating that the speaker is ready for pairing. NOTE: While the speaker can store up to eight paired devices, it can only maintain an active connection with up to three of them at a time two for BOOM.
Block Party within the Ultimate Ears app is no longer available with our latest app update, because we realized that the majority of our customers use their mobile phone's Bluetooth settings to switch between multiple music sources instead of Block Party. Tap lets you control the music directly from your BOOM 2. Note: Tap Controls can only be enabled through the app.
The first time you use this feature, you must connect your BOOM 2 to the app. Once they are connected, open the app to activate Tap Controls in the settings. Note: Your speaker may be held at a slight tilt, but Tap will not work if the speaker is upside down or on a flat surface. Tap the top of the speaker: One time - To play music and tap again to pause the music.
Two times - To skip a song. While we encourage you to take your Ultimate Ears Speaker wherever the party goes, we also want it to look great and last as long as possible. We highly recommend that you thoroughly rinse your Ultimate Ears Speaker with fresh water after using it in a swimming pool or the ocean.
Additionally you can check the app. For the best experience, we recommend connecting to one speaker through Bluetooth. However, industry-wide, for all Bluetooth devices, there will always be some latency audio lag when viewing videos, and the amount of the audio latency is specific to the video application and OS. To fix this issue, try the following on the device you no longer want to use:. If this happens, try the following:. A: You may experience audio problems if one of the two devices keeps requesting the connection while the current device is streaming.
If so, try the following:. It comes out of the box ready to pair. This lets you quickly switch to a second device to play audio without having to go through the connection process again. NOTE: While the speaker can store up to eight paired devices, it can only maintain an active connection with two of them at a time.
To reconnect a device after the initial pairing or after pairing another device:. If you need a replacement part, please contact support to obtain a replacement. NOTE: You might have to un-pair and re-pair your speaker for the changes to take effect.
For the best experience, we recommend connecting to one speaker through Bluetooth. However, industry-wide, for all Bluetooth devices, there will always be some latency audio lag when viewing videos, and the amount of the audio latency is specific to the video application and OS. The lowest latency, with a single speaker, is around milliseconds. To most people, this is not a noticeable latency that negatively affects the video viewing experience.
We have been informed by some customers that there is a noticeable latency that negatively affects the video viewing experience when connecting the speaker to a 3. Apps available Get Control on your speakers and music. After updating to iOS 13, you will need to allow the app to access Bluetooth. In case you have installed the app after the iOS update, you will be prompted with a message requesting Bluetooth access for the app.
Cleaning the acoustic skin i. Quickly rinse the soap off or wipe with a damp cloth and let dry. Or you can use disinfectant wipes. Apply some cleaning solution to the microfiber cloth. Wipe the rubber strap as well as the top and bottom caps. Wipe any excess cleaning solution off with a dry cloth. However, they can only play back in standard Double Up mode, and cannot switch to Stereo mode.
Please see the Immersion Guide in the app for more details on the difference between Stereo and Double modes. A: Updating your app with the latest version should solve the issue.
Love it? Keep it forever. Not so much. To find this setting, go to: For iOS 5. To fix this, we smoothed out the volume steps to make them a little closer together and we made the increases in volume more consistent.
Whereas the first few of steps previously increased the volume by an average of 8 or 9 decibels, the volume increase in the first steps now averages closer to 5 decibels. For you this means that finding the perfect volume for any song is now much easier. And for inquiring minds, here is a chart that demonstrates the exact differences between the previous volume steps and the new volume step. You can only set one alarm, however, and can not set multiple alarms for different times of day.
A: A backup alarm will play on your phone or tablet. To use a music service with the alarm: Play the music you would like from music service. This can be a specific song, a playlist or a radio station. If you had registered your computer with the manufacturer, the serial number should be available on the Registration document. If you were provided with a Warranty or you purchased extended Warranty, the Serial Number should be available on the Warranty certificate.
In case of a Laptop with removable battery, the Serial Number might be present on the sticker attached in the battery compartment. In case of a desktop computer, it is not uncommon to find the Serial Number on a sticker attached inside the computer case. You should be able to find Microsoft Serial Number on the packaging in which your Surface Device was delivered.
If you do not have the original packaging, you should be able to find Microsoft Serial Number using the Surface App found on every Surface device.
0コメント